APEX EC-7 Corvette
$384.00 – $474.00
APEX EC-7 Corvette
Narrowbody
C5 (1997-2004)
C6 (2005-2013)
C7 (2014-2019)
Fitment Guides available at the bottom of the page
Please check with us to confirm availability.
APEX EC-7 Corvette Narrowbody
Fitment Guides are at the bottom of the page
Race Silver, Anthracite, Satin Black
Matte Bronze
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Introducing APEX EC-7 wheels, specifically designed for your narrowbody Corvette. Looking for an affordable, lightweight, and durable track wheel? We believe the EC-7 checks all those boxes. Extensive brake testing allowed us to ensure these wheels clear factory brakes and many aftermarket big brakes kits like the AP Racing Radi-Cal, Wilwood, and more! High HP cars running wide wheels need extra strength. Extensive FEA resulted in a light wheel that is still 20% higher than the JWL/VIA standard. Attention to the small details and ensures that factory center caps will fit.
Special attention was given to ensure these wheels performed optimally for SpecCorvette racers. The 18x11” ET57 square setup offers a knurled bead to reduce tire slippage under high loads while providing excellent brake clearance for the spec Wilwood setup.
OVERVIEW
A timeless motorsport design engineered to optimize weight and strength. Also an incredible value, making it one of our most popular wheels.
- Massive Brake Clearance
- Lifetime Structural Warranty
- Unmatched Replacement Program
- Independently Tested and Certified
FITMENT TABLE
| SIZE | APPROX. WEIGHT |
LOAD RATING |
MSRP |
|---|---|---|---|
| 18x10.0" ET58 | 22.1 | 1,600 | $349 |
| 18x11.0" ET57 | 24.7 | 1,600 | $379 |
| 19x11.0" ET78 | 24.6 | 1,650 | $429 |
Weight and Load Rating listed in pounds (lbs). All Corvette wheels are 5x120.65mm bolt pattern and 70.3mm centerbore.
FINISH AVAILABILITY
The table below shows which finishes are available in each size.
| SIZE | ANTHRACITE | SATIN BLACK |
RACE SILVER |
MATTE BRONZE |
|---|---|---|---|---|
| 18x10.0" ET58 | ✔ | ✔ | ||
| 18x11.0" ET57 | ✔ | ✔ | ✔ | ✔ |
| 19x11.0" ET78 | ✔ | ✔ |
ADDITIONAL FEATURES
Hub Centric
No centering rings required. All Corvette specific 5x120.65mm bolt pattern wheels feature a direct-fit, 70.3mm center bore.
Center Caps
ALL APEX wheels come with our Gloss Black cap included which is interchangeable with the Corvette C7 OE cap.
Hardware
The EC-7 wheels can be used with all Corvette OEM and aftermarket mounting hardware with a 60° tapered seat.
TPMS
All APEX wheels accept OEM and aftermarket Tire Pressure Monitoring Sensors and standard fit valve stems. We offer sensors and stems as an option.
FITMENT QUESTIONS? READ THE APEX GUIDES.
APEX has done countless hours of test-fitting to come up with the perfect chassis-specific widths and offsets. Whether you’re looking for a clean and conservative OEM+ fitment or an all-out aggressive track/race setup, you're covered. Check out the fitment guides below.
**Shipping rates are for wheels ordered in pairs - regular ground shipping rates apply to single wheel orders**
On occasion certain sizes may be on backorder. Please check with us to confirm availability.
